| WorléeThix S 6358 | Worlée-Chemie G.m.b.H. | WorléeThix S 6358 is a long oil thixotropic alkyd resin. With the addition of polar solvents and heat the soft gel structure is not totally degradable. This grade has a non volatile content of 50% ± 2. It is used for the manufacture of anticorrosive primer...view more WorléeThix S 6358 is a long oil thixotropic alkyd resin. With the addition of polar solvents and heat the soft gel structure is not totally degradable. This grade has a non volatile content of 50% ± 2. It is used for the manufacture of anticorrosive primers, decorative and building paints as well as wood glazings. W´Thix S 6358 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| OPTIGEL® CK | BYK | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primer...view more OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. view less | |
| OPTIGEL® CK | Univar Solutions | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primer...view more OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. view less | |
| WorléeThix V 747 (50%-54% Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix V 747 (50%-54% Dearomatized HC 180-220) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of 52...view more WorléeThix V 747 (50%-54% Dearomatized HC 180-220) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of 52% ± 2. All these paint systems show very good application properties while brushing rolling and spraying. W´Thix V 747 avoids sagging from vertical surfaces. view less | |
| Silane Coupling Agent KH-792 | Zhejiang Feidian Chemical Co., Ltd. | KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primer...view more KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker(moisture crosslinking of polymers). The application as coupling agent leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primer...view more Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| Reactol™ 1717 A | Lawter | Reactol™ 1717 A is a pale-colored polyketone resin that is soluble in alcohol and which exhibits a high degree of polarity and a broad range of compatibility. This chemistry helps to improve pigment wetting, gloss and adhesion. Coatings and inks that use the resin display better inner-coat adhesion which is ideal for coatings and base primer...view more Reactol™ 1717 A is a pale-colored polyketone resin that is soluble in alcohol and which exhibits a high degree of polarity and a broad range of compatibility. This chemistry helps to improve pigment wetting, gloss and adhesion. Coatings and inks that use the resin display better inner-coat adhesion which is ideal for coatings and base primers. Reactol™ 1717 A is suitable for use in vinyl sealers and coatings, flexographic and rotogravure inks, heat-seal coatings and in laminating inks. view less | |
| AFCONA - 5244 | AFCONA Additives Sdn Bhd | AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the interfacial tension between pigments or extenders and the vehicle. AFCONA – 5244 stabilizes pigments through electrical charge repulsion forces, finding application in epoxies and polyurethane primer...view more AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the interfacial tension between pigments or extenders and the vehicle. AFCONA – 5244 stabilizes pigments through electrical charge repulsion forces, finding application in epoxies and polyurethane primers, UPE applications such as gel coats, buttons, SMC, and BMC, and in P VC systems. view less | |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primer...view more DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primer...view more CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. view less | |
| Vinyltris-(2-Methoxyethoxy)Silane | Dalian Onichem Co., Ltd. | Vinyltris-(2-Methoxyethoxy)Silane is a bifunctional organosilane processing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. It is very easy to dissolve in water as well because of its ether structure. Vinyltris-(2-Methoxyethoxy)Silane is used mainly in mineral-filled EPM (ethylene propylene monomer) and EPDM (ethylene propylene diene monomer) cables. It is also used in the production of silane-modified polymers that serve as binders for paints and adhesives, and as an adhesion promoter in primer...view more Vinyltris-(2-Methoxyethoxy)Silane is a bifunctional organosilane processing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. It is very easy to dissolve in water as well because of its ether structure. Vinyltris-(2-Methoxyethoxy)Silane is used mainly in mineral-filled EPM (ethylene propylene monomer) and EPDM (ethylene propylene diene monomer) cables. It is also used in the production of silane-modified polymers that serve as binders for paints and adhesives, and as an adhesion promoter in primers and coatings. view less | Request Sample |
| WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1....view more WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. When paints or lacquers based on W´Kyd B 865 U are applied by conventional or airless spray, only water irrigated spraying cabinets are recommended as the spraying dust tends to self-ignite if it is dry. view less | |
| WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. W´Kyd ...view more WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. W´Kyd B 865 U is compatible with the majority of medium and long oil types of air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeKyd S 6003 (51% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile...view more WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 51% ± 1. W´Kyd S 6003 is compatible with the majority of medium and long oil types air-drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...view more WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 decreases sagging from vertical surfaces. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| Alkipol 380-50 T | Polidur San Luis | Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 T has applications in fast air drying enamels, varnishes for electrical uses, fast air dry corrosion resistant primer...view more Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 T has applications in fast air drying enamels, varnishes for electrical uses, fast air dry corrosion resistant primers and is an air dry modifier for medium oil alkyd resins. view less | |
| Razeen® SR 5071 | Jubail Chemical Industries Co. | Razeen® SR 5071 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 has a softening point value of 77 - 82 °C is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primer...view more Razeen® SR 5071 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 has a softening point value of 77 - 82 °C is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primers, marine finishes, floor finishes, and concrete coatings. view less | |
| RHOPLEX EI-6000 | Univar Solutions | RHOPLEX EI-6000 is a 100% acrylic binder designed for use in formulating clear matrix aggregate finishes for exterior insulation and finish systems (EIFS), clear sealers for granule-coated metal roof tiles, and primers and basecoats for elastomeric roof c...view more RHOPLEX EI-6000 is a 100% acrylic binder designed for use in formulating clear matrix aggregate finishes for exterior insulation and finish systems (EIFS), clear sealers for granule-coated metal roof tiles, and primers and basecoats for elastomeric roof coatings. It offers excellent resistance to water blushing (or water whitening) when used on exterior surfaces. This product also has excellent overall durability to weathering, excellent adhesion to a variety of substrates and good dirt pickup resistance. view less | |
| EMULSION E-2353 | Univar Solutions | EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and top...view more EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer, such as RHOPLEX™ AC-261, to improve on flexibility and toughness. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long-term warranty applications. view less | |
| OROTAN™ 731 DP | Univar Solutions | OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosion resistance for flat primer...view more OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosion resistance for flat primers, low VOC paints, interior and exterior flat, sheen, and semi-gloss paints, and glossy topcoats. It lends to improved dispersing, stability, and film properties in a broad array of coating systems. view less | |
| AFCONA - 2018 | AFCONA Additives Sdn Bhd | AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing and is widely compatible, making it suitable for use in clear and high gloss coatings, and can be used in resin manufacturing as a pre-added defoamer. AFCONA – 2018 finds application in polyurethane coatings for wood, acid-curing coatings for wood and etching/wash primer...view more AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing and is widely compatible, making it suitable for use in clear and high gloss coatings, and can be used in resin manufacturing as a pre-added defoamer. AFCONA – 2018 finds application in polyurethane coatings for wood, acid-curing coatings for wood and etching/wash primers, and in NC lacquers for wood. view less | |
| Tiona® R-KB-2 | Cristal Global | Tiona® R-KB-2, in the form of a white odorless powder, is a general purpose rutile titanium dioxide pigment. It is intended to deliver easy dispersion in a assortment of coatings and plastics applications. The good dispersion properties result in good weathering resistance and very good optical characteristics in coating systems and plastics. Tiona® R-KB-2 has recommended applications in general industrial coatings, solvent and water based decorative coatings, primer...view more Tiona® R-KB-2, in the form of a white odorless powder, is a general purpose rutile titanium dioxide pigment. It is intended to deliver easy dispersion in a assortment of coatings and plastics applications. The good dispersion properties result in good weathering resistance and very good optical characteristics in coating systems and plastics. Tiona® R-KB-2 has recommended applications in general industrial coatings, solvent and water based decorative coatings, primers and undercoats, and more. view less | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primer...view more DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primer...view more Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. view less | |
| BENASOL FL 34 | Benasedo | BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primer...view more BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primers endowed with easy sanding properties and applied by brush or roll. Wide compatibility with medium-long-oil alkyd resins. view less | |
| WorléeThix S 6357 | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 is a long oil thixotropic alkyd resin. This grade has a non volatile content of 45% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. W´Thix S 6357 is especially suitable for the manufacture of anticorrosive primer...view more WorléeThix S 6357 is a long oil thixotropic alkyd resin. This grade has a non volatile content of 45% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. W´Thix S 6357 is especially suitable for the manufacture of anticorrosive primers, decorative and building paints as well as thick layer wood glazings. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| CoatOSil* T-Cure Silane Oligomer | Momentive | CoatOSil* T-Cure Silane Oligomer may be useful in the development of coating formulations, such as Polyaspartic and 2K Polyurethane systems, where reactivity with a mercapto silane is desirable. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primer...view more CoatOSil* T-Cure Silane Oligomer may be useful in the development of coating formulations, such as Polyaspartic and 2K Polyurethane systems, where reactivity with a mercapto silane is desirable. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primers for metals and flooring, and aurospace and automotive refinishing applications. view less | |
| Razeen® SR 5071 Flake | Jubail Chemical Industries Co. | Razeen® SR 5071 Flake is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 comes in a flake form with a softening point value of 77 - 82 °C and is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primer...view more Razeen® SR 5071 Flake is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 comes in a flake form with a softening point value of 77 - 82 °C and is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primers, marine finishes, floor finishes, and concrete coatings. view less | |
| AFCONA - 5044 | AFCONA Additives Sdn Bhd | AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5044 is widely compatible in systems from no polarity to high polarity, finding application in primer...view more AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5044 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| AFCONA - 3772 | AFCONA Additives Sdn Bhd | AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primer...view more AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primers, and in printing inks. view less | |
| SmartHide™ | ShayoNano USA, Inc. | SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon zinc oxide composite pigment that can also provide the beneficial functionality of a zinc oxide in a more formula stable manor. This product can be used for ceiling paints, traffic paints, roof coatings, water-based ink, interior and exterior paints, DTM enamel, specialty primer...view more SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon zinc oxide composite pigment that can also provide the beneficial functionality of a zinc oxide in a more formula stable manor. This product can be used for ceiling paints, traffic paints, roof coatings, water-based ink, interior and exterior paints, DTM enamel, specialty primers, and paper coatings. view less | |
| EBECRYL® 4250 | Allnex | EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation of moisture-curing one-component polyurethane coatings, especially for one-component adhesion primer...view more EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation of moisture-curing one-component polyurethane coatings, especially for one-component adhesion primers. view less | Request Sample |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primer...view more Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. view less | |
| CRAYVALLAC® WN-1265 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1265 is a micronised amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of Solvent based or Water Based Wood primers and sealers. An additional advantage to be gained in this application is the a...view more CRAYVALLAC® WN-1265 is a micronised amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of Solvent based or Water Based Wood primers and sealers. An additional advantage to be gained in this application is the absence of bloom when used in acid cured formulations. CRAYVALLAC® WN-1265 is also an effective internal lubricant for plastic compounding. In powder coatings, CRAYVALLAC® WN-1265 improves degassing properties and allows high thickness applications of HAA cured paints, even on difficult substrates. view less | |
| AFCONA - 5209 | AFCONA Additives Sdn Bhd | AFCONA – 5209 is a fatty acid polyamide appearing as a transparent yellow to brown liquid. This product functions as an anionic and catatonic wetting and dispersing additive to improve the wetting of pigment surfaces by preventing interfacial tension between the hydrophilic pigments, extenders, and the binder, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5209 provides anti-settling and anti-sagging properties in bentonite gelling, and finds application in primer...view more AFCONA – 5209 is a fatty acid polyamide appearing as a transparent yellow to brown liquid. This product functions as an anionic and catatonic wetting and dispersing additive to improve the wetting of pigment surfaces by preventing interfacial tension between the hydrophilic pigments, extenders, and the binder, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5209 provides anti-settling and anti-sagging properties in bentonite gelling, and finds application in primers, decorative paints, marine paints, and heavy-duty paints, and in long, medium, and short oils, NC, TPA, acid curing, polyurethane, and epoxy systems. view less | |
| Dynasylan® AR | Evonik Operations GmbH, BL Silanes | Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic casting molds and as a binder for 2-pack zinc dust anti-corrosion paints (e.g. shop-primer...view more Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic casting molds and as a binder for 2-pack zinc dust anti-corrosion paints (e.g. shop-primers). In zinc rich paints with a zinc content above 95% Dynasylan® AR binds the zinc and allows the formation of hard coatings with an effective galvanic protection. view less | |
| Dynasylan® SILBOND® HT-28A | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primer...view more Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher silica content as compared to a ethyl polysilicate binder. view less | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Coil Coating Topcoat (Formulation #T 24401.1A) | Hoffmann Mineral | Coil Coating Topcoat (Formulation #T 24401.1) featuring SILLITIN Z 89. | |
| Coil Coating Topcoat (Formulation #T 24401.1 B) | Hoffmann Mineral | Coil Coating Topcoat (Formulation #T 24401.1 B) featuring AKTIFIT AM. | |
| White Acrylic Topcoat for Airless Spray (Formulation #07-1041A) | Ashland | PVC 13% based on Neocryl* XK-98 acrylic topcoat - airless and air sprayable. | |
| Interior Flat Paint Formula with 2% Titanium Dioxide Pigment (Formulation #07-1043) | Ashland | This formulation is based on PVC 85% and Acronal* 290D. | |
| OEM Topcoat with Metallic Flake Pigments (Formulation #SPF_CTG_033_2203) | Arkema Rheology & Specialty Additives | This OEM topcoat formulation features Coadis™ 790. | |
| ANTI-TERRA®-204 | BYK | ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primer...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less | |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primer...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| LIOPTAL 836 | Synthopol Chemie Germany | LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced dry...view more LIOPTAL 836 is a short-oil drying alkyd resin. It is suitable for use in air-drying primers, as well as single and top coats. It has good dipping bath stability. The low oil content of Lioptal 836 yields very quick-drying glossy top coats. With forced drying, e.g. 30 min / 80°C, very hard films are obt ained within a short period of time. Dipping coatings based on Lioptal 836 have excellent tank stability. The possibility of combining with clorinated vinyl polymers (e.g. Laroflax) is also worth mentioning. view less | |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primer...view more DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| XIAMETER™ PMX-0245 Cyclopentasiloxane | Univar Solutions | XIAMETER® PMX-0245 Cyclopentasiloxane is a volatile polydimethylcyclosiloxane composed mainly of cyclopentasiloxane. It may be used in antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions and stick products, bath oils, suntan a...view more XIAMETER® PMX-0245 Cyclopentasiloxane is a volatile polydimethylcyclosiloxane composed mainly of cyclopentasiloxane. It may be used in antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions and stick products, bath oils, suntan and shaving products, make-up and nail polishes. view less | |
| WorléeKyd B 845 70% Xylene | Worlée-Chemie G.m.b.H. | WorléeKyd B 845 70% Xylene is a medium oil, very fast drying alkyd resin based on cotton seed and soya oils. It is designed for the production of high quality air and heat drying industrial enamels and car repair enamels. Due to the very good properties, W´Kyd B 845 is used as a binder for high quality industrial enamels, radiator, dipping and flow coating paints and enamels for trucks, touring cars, omnibuses, tractors and agricultural equipment. W´Kyd B 845 can also be used for nitro cellulose combinations and for air- and heat drying primer...view more WorléeKyd B 845 70% Xylene is a medium oil, very fast drying alkyd resin based on cotton seed and soya oils. It is designed for the production of high quality air and heat drying industrial enamels and car repair enamels. Due to the very good properties, W´Kyd B 845 is used as a binder for high quality industrial enamels, radiator, dipping and flow coating paints and enamels for trucks, touring cars, omnibuses, tractors and agricultural equipment. W´Kyd B 845 can also be used for nitro cellulose combinations and for air- and heat drying primers with very good elasticity. view less | |
| WorléeSol E 440 W | Worlée-Chemie G.m.b.H. | WorléeSol E 440 W is a medium oil PU alkyd emulsion designed for the manufacture of air drying water thinnable high gloss top coats. This grade has a non volatile content of 40% ± 2. Top coats with high gloss, excellent hardness and very good water resistance can be formulated. Paints based on W´Sol E 440 W show good gloss stability after storage. Further application fields for W´Sol E 440 W are air drying anti-corrosion primer...view more WorléeSol E 440 W is a medium oil PU alkyd emulsion designed for the manufacture of air drying water thinnable high gloss top coats. This grade has a non volatile content of 40% ± 2. Top coats with high gloss, excellent hardness and very good water resistance can be formulated. Paints based on W´Sol E 440 W show good gloss stability after storage. Further application fields for W´Sol E 440 W are air drying anti-corrosion primers with excellent salt spray resistance and wood stains with very good outdoor stability. view less | |
| K-FLEX® 500P Low-VOC Coalescent | LANXESS (former Emerald Performance Materials) | K-FLEX® 500P offers excellent scrub resistance and gloss and aids in the development of desirable performance characteristics while offering improved handling due to low temperature flexibility. Its performance and value make it a viable replacement to higher-volatility coalescents such as TMPDMIB (2,2,4-trimethyl-1,3-pentanediol monoisobutyrate) or even low-VOC types such as triethylene glycol di-2-ethylhexanoate. It is highly recommended for interior and exterior latex paints, industrial coatings, nitrocellulosic and acrylic lacquers, and special purpose coatings. It is also effective in direct-to-metal coatings such as primer...view more K-FLEX® 500P offers excellent scrub resistance and gloss and aids in the development of desirable performance characteristics while offering improved handling due to low temperature flexibility. Its performance and value make it a viable replacement to higher-volatility coalescents such as TMPDMIB (2,2,4-trimethyl-1,3-pentanediol monoisobutyrate) or even low-VOC types such as triethylene glycol di-2-ethylhexanoate. It is highly recommended for interior and exterior latex paints, industrial coatings, nitrocellulosic and acrylic lacquers, and special purpose coatings. It is also effective in direct-to-metal coatings such as primers. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| Versamid® 100 | Gabriel Performance Products | Versamid® 100 is a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. Versamid® 100 and epoxy resin systems are recommended for applications such as: Maintenance coating applications, primer...view more Versamid® 100 is a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. Versamid® 100 and epoxy resin systems are recommended for applications such as: Maintenance coating applications, primers, and enamel paint formulations. view less | |
| Versamid® 115 | Gabriel Performance Products | Versamid® 115 is a high viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for flexible and resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 115 and epoxy resin systems provide excellent resistance properties, adhesion and superior corrosion resistance. They are more solvent and chemical resistant than Versamid® 100 systems and generally dry faster than Versamid® 125 systems. Versamid® 115 and epoxy resin systems are recommended for applications such as: Maintenance coating applications, Primer...view more Versamid® 115 is a high viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for flexible and resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 115 and epoxy resin systems provide excellent resistance properties, adhesion and superior corrosion resistance. They are more solvent and chemical resistant than Versamid® 100 systems and generally dry faster than Versamid® 125 systems. Versamid® 115 and epoxy resin systems are recommended for applications such as: Maintenance coating applications, Primers, and Enamel paint formulations. view less | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| Nubirox 302 in Solvent Based DTM Alkyd System (Formulation #AC 19630) | Ferro Pigments | This solvent based DTM alkyd system features Nubirox 302. | |
| AKTISIL MAM | Hoffmann Mineral | AKTISIL MAM is an activated SILLITIN V 88, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Can be used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Crestakyd® 44-5043 | Scott Bader | Crestakyd® 44-5043 is a rosin and phenolic alkyd used for general purpose. Rosin and phenolic alkyd used for dry and excellent solvent release. | |
| WorléeKyd C 743 HS | Worlée-Chemie G.m.b.H. | WorléeKyd C 743 HS is an extremely low viscous short oil and non-drying alkyd resin for the manufacture of high solids, oven cured primers, filler and top coats. This grade has a non-volatile content of 80% ± 2. W´Kyd C 743 hs is compatible with some shor...view more WorléeKyd C 743 HS is an extremely low viscous short oil and non-drying alkyd resin for the manufacture of high solids, oven cured primers, filler and top coats. This grade has a non-volatile content of 80% ± 2. W´Kyd C 743 hs is compatible with some short oil non-drying alkyds, such as W´Kyd D 233 and SM 400. Although W´Kyd C 743 hs is very low viscous, it is a high reactive stoving resin. Optimal film properties can be achieved at stoving conditions 10-30 min. at 160 - 130 °C, normally without addition of any catalyst. view less | |
| HALOX® BW-100 | ICL Phosphate Specialty | HALOX® BW-100 by ICL is a low-cost tannin stain-inhibiting pigment used in exterior architectural wood coatings. It is barium phosphosilicate-based, non-refractive grade used in protective coating systems. It provides minimal hiding with decent exterior durability. It provides performance and compatibility in a variety of resin systems such as acrylic latexes, vinyl acrylic latexes, styrenated acrylic latexes, and solvent-based alkyds. It is suitable for water-based systems. It is effective in high PVC alkyd primer...view more HALOX® BW-100 by ICL is a low-cost tannin stain-inhibiting pigment used in exterior architectural wood coatings. It is barium phosphosilicate-based, non-refractive grade used in protective coating systems. It provides minimal hiding with decent exterior durability. It provides performance and compatibility in a variety of resin systems such as acrylic latexes, vinyl acrylic latexes, styrenated acrylic latexes, and solvent-based alkyds. It is suitable for water-based systems. It is effective in high PVC alkyd primers and demonstrates excellent performance. The dosage level of HALOX® BW-100 is 5-10% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| CLAYTONE-MPZ | BYK | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primer...view more CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. view less | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Polurgreen ES.M | S.A.P.I.C.I. SpA | Polurgreen ES.M is an isocyanurate. This product dries quickly with good pot life and yellowing resistance. It can be used in polyurethane topcoats with high solids content. Polurgreen ES.M's high nitrocellulose facilitates good cross-linking with high...view more Polurgreen ES.M is an isocyanurate. This product dries quickly with good pot life and yellowing resistance. It can be used in polyurethane topcoats with high solids content. Polurgreen ES.M's high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. view less | |
| Polurene IR 51 AB | S.A.P.I.C.I. SpA | Polurene IR 51 AB is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| Polurene HR.B | S.A.P.I.C.I. SpA | Polurene HR.B is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene HR.B.S. | S.A.P.I.C.I. SpA | Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% T...view more Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% TDI isocyanates. view less | |
| Polurene KC | S.A.P.I.C.I. SpA | Polurene KC is a mixed isocyanurate. This product sands well, either by hand or with sanding machines. It dries quickly with good elasticity. Polurene KC can be used in polyurethane sealers and matt topcoats. In particular, use of this product can imp...view more Polurene KC is a mixed isocyanurate. This product sands well, either by hand or with sanding machines. It dries quickly with good elasticity. Polurene KC can be used in polyurethane sealers and matt topcoats. In particular, use of this product can improve between-layer adhesion. view less | |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Borchers® Deca Manganese 8 | OMG Borchers GmbH | Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primer...view more Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Borchers® Deca Manganese 8 HS | OMG Borchers GmbH | Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primer...view more Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Polurene 3031 | S.A.P.I.C.I. SpA | Polurene 3031 is an aromatic isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene 60 T | S.A.P.I.C.I. SpA | Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI ...view more Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI isocyanates. view less | |
| Polurene 7581 | S.A.P.I.C.I. SpA | Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in ad...view more Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in adverse weather conditions of high temperature and humidity. This product contains less than .5% TDI isocyanates. view less | |
| Polurene 2391 | S.A.P.I.C.I. SpA | Polurene 2391 is an aliphatic-aromatic isocyanurate. This product has good yellowing resistance, elasticity, hardness, filling and gloss. It can be used in clear or pigmented high-quality polyurethane high gloss topcoats. This product contains less tha...view more Polurene 2391 is an aliphatic-aromatic isocyanurate. This product has good yellowing resistance, elasticity, hardness, filling and gloss. It can be used in clear or pigmented high-quality polyurethane high gloss topcoats. This product contains less than .5% TDI or IPDI isocyanates. view less | |
| Rexin HS 0685 AB | S.A.P.I.C.I. SpA | Rexin HS 0685 AB is a short-oil alkyd resin. This product has good solvent release, good hardness, and a long pot life. It can be used in matt, clear, or pigmented polyurethane topcoats with high solids formulations. | |
| Rexin HS 129/70 AB | S.A.P.I.C.I. SpA | Rexin HS 129/70 AB is a short-oil alkyd resin. This product dries quickly with good solvent release. If used alone, it can improve the surface hardness and leveling of matte topcoats. In combination with flexible resins, it can improve the sandability ...view more Rexin HS 129/70 AB is a short-oil alkyd resin. This product dries quickly with good solvent release. If used alone, it can improve the surface hardness and leveling of matte topcoats. In combination with flexible resins, it can improve the sandability of sealers. view less | |
| Rexin 143/70 AB | S.A.P.I.C.I. SpA | Rexin 143/70 AB is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and high wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Rexin LS 124 | S.A.P.I.C.I. SpA | Rexin LS 124 is a low-viscosity short-oil alkyd resin. This product has good elasticity, adhesion and pigment wettability. It can be used in pigmented polyurethane sealers and topcoats. This product also creates an abrasion-resistant coating. | |
| Rexin HG 3 | S.A.P.I.C.I. SpA | Rexin HG 3 is a short-oil alkyd resin. This product cures quickly with good yellowing resistance and body filling. It can be used in clear or white high-gloss topcoats. | |
| Rexin 138 | S.A.P.I.C.I. SpA | Rexin 138 is a short-oil alkyd resin. This product cures quickly because of high cross-linking capabilities. It can be used in 2K polyurethane matt topcoats. | |
| Rexin DP 343 | S.A.P.I.C.I. SpA | Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings...view more Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings. view less | |
| Rexin DP 390 | S.A.P.I.C.I. SpA | Rexin DP 390 is a saturated polyester resin. This product dries quickly with good flexibility, hardness, and a long pot life. It can be used in clear or pigmented matte and high gloss 2K polyurethane sealers and top coats. | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primer...view more HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| Crestakyd® 10-1019 | Scott Bader | Crestakyd® 10-1019 is a top quality gloss paints for both decorative and marine applications. | |
| Crestakyd® 10-1022 | Scott Bader | Crestakyd® 10-1022 is a standard top quality alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2020 | Scott Bader | Crestakyd® 10-2020 is a standard long oil alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2033 | Scott Bader | Crestakyd® 10-2033 is a fast drying alkyd with good flow characteristics. | |
| Crestakyd® 10-2505 | Scott Bader | Crestakyd® 10-2505 is suitable for high solids decorative paints and lacquers with excellent durability. | |
| Crestakyd® 10-3507 | Scott Bader | Crestakyd® 10-3507 is a top quality alkyd for use in decorative gloss paints and varnishes. | |
| Polurgreen ES.P | S.A.P.I.C.I. SpA | Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linkin...view more Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. view less | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| 4997-X-50 Epoxy Ester Resin | Gabriel Performance Products | 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat. | |
| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...view more CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. view less | |
| Borchi® Gel LW 44 | OMG Borchers GmbH | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primer...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less | |
| HALOX® CZ-170 | ICL Phosphate Specialty | HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective repl...view more HALOX® CZ-170 by ICL is a universal corrosion and tannin stain-inhibiting pigment. It is designed for architectural and protective coating systems and multi-substrate protection. It is barium- & antimony-free, non-refractive grade. It is an effective replacement for zinc oxide. It can also be used in high gloss (+75 gloss units at 60°) and thin film (<1.0 mils or 25 microns) applications, due to its finer mean particle size and narrow particle size distribution. It is suitable for water-based epoxy esters, short-, medium- & long oil alkyd, and solvent-based water-reducible alkyds, alkyd dispersions, and acrylics. HALOX® CZ-170 can be used in specific systems that protect metal and wood substrates. It is also used in powder coatings and wash & etch primers. The dosage level for multi-substrate water-based systems is 2-5% by total formula weight and 0.5-2% for high gloss & thin film coatings. It has a shelf life of 36 months. view less | Request Sample |
