| 3126 Fast Red BBM | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3126 Fast Red BBM has a pH value of 7.0, oil absorption of equal to or less than 555, and a heat resistance of 200. It has recommended applications in PS, aqueous paints, water-based inks, and possible applications in PMMA and solvent-based paints. | |
| 3128 Permanent Red F5RK | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3128 Permanent Red F5RK has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in solvent-based paints, PS, AS, ABS, PMMA, and possible applications in offset ink, and solvent and w...view more 3128 Permanent Red F5RK has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in solvent-based paints, PS, AS, ABS, PMMA, and possible applications in offset ink, and solvent and water based inks. view less | |
| 313 Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313 Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 313 R Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313 R Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 3135 Fast Red F2R | Hangzhou Jiekai Chemical Co., Ltd. | 3135 Fast Red F2R is a naphthol red pigment that can be used in aqueous inks and textile printing applications. This product's density is 1.7 g/cm3 and its pH value is 6.5. Its molecular weight is 436.29. | |
| 3136 Phthalo Green 36 | Lansco Colors | 3136 Phthalo Green 36 is a yellow shade fully brominated phthalocyanine green pigment with good tinting strength and color purity. This product is used in various coatings and water based inks. | |
| 313S Iron Oxide Yellow | Hangzhou Jiekai Chemical Co., Ltd. | 313S Iron Oxide Yellow is a yellow crystal powder inorganic pigment comprised of 86% minimum Fe2O3. It is insoluble in water and alcohols, soluble in acids. It is designed for use as a colorant in paint and printing inks. | |
| 3150 Permanent Red FGR | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3150 Permanent Red FGR has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 150. It has recommended applications in aqueous paints, offset inks, solvent and water based inks, and possible applications in PS, AS, ABS,...view more 3150 Permanent Red FGR has a pH value of 7.0, oil absorption of equal to or less than 50, and a heat resistance of 150. It has recommended applications in aqueous paints, offset inks, solvent and water based inks, and possible applications in PS, AS, ABS, and PMMA. view less | |
| 318 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 318 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 95% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 329-A Chromium Oxide Green | Lansco Colors | 329-A Chromium Oxide Green is a clean, medium shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 329-A Chromium Oxide Green is used in coatings and is r...view more 329-A Chromium Oxide Green is a clean, medium shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 329-A Chromium Oxide Green is used in coatings and is recommended for the construction industry. view less | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 330 Iron Oxide Black | Hangzhou Jiekai Chemical Co., Ltd. | 330 Iron Oxide Black is a black crystal powder inorganic pigment comprised of 90% minimum Fe3O4. It is insoluble in water and alcohols, soluble in concentrated strong acids. It is used as a colorant in paints, printing inks and coatings. | |
| 3320 Phthalo Green 7 | Lansco Colors | 3320 Phthalo Green 7 is a phthalocyanine medium-yellow shade pigment with good tinting values, color purity and a high degree of permanency. This product is used in UV and water based inks and coatings. | |
| 333 Chromium Oxide Green | Lansco Colors | 333 Chromium Oxide Green is a clean, light to medium shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 333 Chromium Oxide Green is used in coatings and...view more 333 Chromium Oxide Green is a clean, light to medium shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 333 Chromium Oxide Green is used in coatings and recommended for the construction industry. view less | |
| (3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 | Zhejiang Feidian Chemical Co., Ltd. | FD-1001 is a (3,3,3 tri fluoro propyl) methyl di-methoxy silane. It is supplied as a colorless liquid. | |
| 3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) | Kowa American Corporation | 3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) is a low viscosity, low odor and excellent solvency monomer containing a light stable cyclic group. TMCHMA is useful in paints, adhesives, sealants, water treatment & other similar applications. TMCHMA provi...view more 3,3,5-Trimethylcyclohexyl methacrylate (TMCHMA) is a low viscosity, low odor and excellent solvency monomer containing a light stable cyclic group. TMCHMA is useful in paints, adhesives, sealants, water treatment & other similar applications. TMCHMA provides impact, chemical, water, weather & abrasion resistance as well as low shrinkage, thermal stability & adhesion. view less | Request Sample |
| 3,4 Dihydro-2-Methoxy-2H-Pyran | Puyang Shenghuade Chemical Co., Ltd. | 3,4 Dihydro-2-Methoxy-2H-Pyran is a liquid base product that is light yellow in color. This product has a boiling point at 126 ºC and a flash point at 16ºC. 3,4 Dihydro-2-Methoxy-2H-Pyran can be used in a variety of applications including paint and coatin...view more 3,4 Dihydro-2-Methoxy-2H-Pyran is a liquid base product that is light yellow in color. This product has a boiling point at 126 ºC and a flash point at 16ºC. 3,4 Dihydro-2-Methoxy-2H-Pyran can be used in a variety of applications including paint and coatings. view less | |
| 3,4-Epoxycyclohexylmethyl (3,4-epoxy) cyclohexane TTA2083 | PhibroChem | 3,4-Epoxycyclohexylmethyl (3,4-epoxy) cyclohexane TTA2083 is a pale yellow liquid produced through unsaturated groups oxidation which performs different reactivity, viscosity, and weatherability compared with general condensation either epoxy resins. This...view more 3,4-Epoxycyclohexylmethyl (3,4-epoxy) cyclohexane TTA2083 is a pale yellow liquid produced through unsaturated groups oxidation which performs different reactivity, viscosity, and weatherability compared with general condensation either epoxy resins. This product's main applications include epoxy active diluent, electrical parts packaging, coating, fiber reinforced composite, LED encapsulants, photo adhesive and curing products, as well as stabilizers and large electrical molds. view less | Request Sample |
| 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to ...view more 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to the dual epoxide functionality which can react with hydroxyl, carboxyl or amine groups of polymers contained in the system. End uses take advantage of the UV stability and low viscosity compared to other epoxy resin. This grade has an assay of 90% min and a weight per epoxide of 131-143. view less | Request Sample |
| 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21L | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21L is a pale yellow to colorless liquid that is part of Cycloaliphatic Epoxy Resin TTA21 Series. It is a general-purpose cycloaliphatic diepoxide used principally with polyacid and anhydride c...view more 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21L is a pale yellow to colorless liquid that is part of Cycloaliphatic Epoxy Resin TTA21 Series. It is a general-purpose cycloaliphatic diepoxide used principally with polyacid and anhydride cures. In particular, it provides good electrical loss properties, good weathering, and a high-heat-distortion temperature. view less | Request Sample |
| 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21P | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21P is a pale yellow to colorless liquid that is part of Cycloaliphatic Epoxy Resin TTA21 Series. It is a general-purpose cycloaliphatic diepoxide used principally with polyacid and anhydride c...view more 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21P is a pale yellow to colorless liquid that is part of Cycloaliphatic Epoxy Resin TTA21 Series. It is a general-purpose cycloaliphatic diepoxide used principally with polyacid and anhydride cures. In particular, it provides good electrical loss properties, good weathering, and a high-heat-distortion temperature. view less | Request Sample |
| 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to...view more 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to the dual epoxide functionality which can react with hydroxyl, carboxyl or amine groups of polymers contained in the system. End uses take advantage of the UV stability and low viscosity compared to other epoxy resin. This grade has an assay of 90% min. view less | Request Sample |
| 3,4-Epoxycyclohexylmethyl Methacrylate TTA15 | PhibroChem | 3,4-Epoxycyclohexylmethyl Methacrylate TTA15 is a light yellow liquid. Because of an unsaturated bond of epoxy and acrylic group, this product has both characteristics of epoxy and acrylic resins and can be cured with multi-curing methods. It has low visc...view more 3,4-Epoxycyclohexylmethyl Methacrylate TTA15 is a light yellow liquid. Because of an unsaturated bond of epoxy and acrylic group, this product has both characteristics of epoxy and acrylic resins and can be cured with multi-curing methods. It has low viscosity, good heat resistance, weatherability and electrical insulation. Some applications of TTA15 include epoxy active diluents, electrical parts packaging, coatings, fiber reinforced composites, LED encapsulates, photo adhesive and curing products, stabilizers, and large electrical molds. view less | Request Sample |
| 3,4,9,10-Perylenetetracarboxylic Dianhydride | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. | 3,4 9,10-Perylenetetracarboxylic Dianhydride is an important intermediate to synthesize perylene dyes and pigments. It is a bright red uniform powder with a melting point >300°C. | |
| 34DT137 | Flint Group | 34DT137 is a yellow shade orange pigment with a color index number of PO 34. It has a specific gravity of 1.4 and is used primarily in offset solutions. | |
| 35 HPC | Toyal Europe | 35 HPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 35 HPS | Toyal Europe | 35 HPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 35 NPC | Toyal Europe | 35 NPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 35 NPS | Toyal Europe | 35 NPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 35 UPC | Toyal Europe | 35 UPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 35 UPS | Toyal Europe | 35 UPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 3,5-Xylidine | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. | 3,5-Xylidine is a colorless or light yellow liquid that is an intermediate for dyes, pigments and pharmaceuticals. | |
| 3,5,5-TRIMETHYL HEXANOL (NONANOL) | KH Neochem Americas, Inc. | Intermediate for cosmetics, fragrance, detergent, lubricant and plasticizer. | |
| 3,6–DIOXAOCTANEDIOIC ACID | AMRI Global | 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low meltin...view more 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. view less | |
| 361 Chromium Oxide Green | Lansco Colors | 361 Chromium Oxide Green is a dark shade, stable, green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 361 Chromium Oxide Green is used in coatings for the construction...view more 361 Chromium Oxide Green is a dark shade, stable, green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherability. 361 Chromium Oxide Green is used in coatings for the construction industry. view less | |
| 3663 Green | Lansco Colors | 3663 Green is a clean, green powder produced by solid state reactions at a very high temperature. It is lightfast, alkali resistant, acid resistant, heat resistant and weather resistant. Applications include stucco coatings, glass enamels, and glazes. Ad...view more 3663 Green is a clean, green powder produced by solid state reactions at a very high temperature. It is lightfast, alkali resistant, acid resistant, heat resistant and weather resistant. Applications include stucco coatings, glass enamels, and glazes. Additional uses can be found in various industrial baking and air-dry coatings view less | |
| 3,6,9–TRIOXADECANOIC ACID | AMRI Global | 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting...view more 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. view less | |
| 3,6,9–TRIOXAUNDECANEDIOIC ACID | AMRI Global | 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low me...view more 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. view less | |
| 3736 Phthalo Green 36 | Lansco Colors | 3736 Phthalo Green 36 is a blue shade brominated phthalocyanine green pigment with good tinting strength and color purity. This product is used in various coatings. | |
| 3777 Phthalo Green 7 | Lansco Colors | 3777 Phthalo Green 7 is a bright, somewhat blue shade phthalocyanine pigment that is used in various inks and coatings. | |
| 386 Chromium Oxide Green | Lansco Colors | 386 Chromium Oxide Green is a dark shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherabilty. 386 Chromium Oxide Green is recommended for military and camouflage...view more 386 Chromium Oxide Green is a dark shade, stable green pigment that is unaffected by acids, alkalis and solvents. This product is heat stable and has good lightfastness and weatherabilty. 386 Chromium Oxide Green is recommended for military and camouflage applications. view less | |
| 3M™ Ceramic Microspheres W-210 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M c...view more 3M™ Ceramic Microspheres White Grade W-210 are made of alkali alumino silicate ceramic and is one of our smallest high-strength ceramic particles with a typical d90 of 12 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-210 are typically chosen over other 3M ceramic microspheres for higher gloss formulations. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-410 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler load...view more 3M™ Ceramic Microspheres White Grade W-410 are made of high-strength alkali alumino silicate ceramic with a typical d90 of 21 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-410 are typically chosen over other 3M ceramic microspheres for their overall balance in properties. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Ceramic Microspheres W-610 | 3M Advanced Materials Division | 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic m...view more 3M™ Ceramic Microspheres White Grade W-610 are made of alkali alumino silicate ceramic and is our largest high-strength ceramic particles with a typical d90 of 32 microns; it has a controlled particle size distribution. Formulating with these 3M ceramic microspheres allows higher filler loadings while maintaining desired properties such as viscosity control. In addition, these engineered particles are added to many paints and industrial coatings to provide scrub and burnish resistance. Due to their smaller particle size, 3M ceramic microspheres white grade W-610 are typically chosen over other 3M ceramic microspheres for increased durability. Formulators may be able to extend resin in their formulation by adding 3M ceramic microspheres and potentially reduce cost. view less | |
| 3M™ Fluorosurfactant FC-4430 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4430 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product can provide stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4432 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4432 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Fluorosurfactant FC-4434 | 3M Advanced Materials Division | 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...view more 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4434 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. view less | |
| 3M™ Glass Bubbles iM16K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles iM30K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K1 | 3M Advanced Materials Division | 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K15 | 3M Advanced Materials Division | 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K20 | 3M Advanced Materials Division | 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K25 | 3M Advanced Materials Division | 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K37 | 3M Advanced Materials Division | 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K42HS | 3M Advanced Materials Division | 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles K46 | 3M Advanced Materials Division | 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S15 | 3M Advanced Materials Division | 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....view more 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S22 | 3M Advanced Materials Division | 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...view more 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S28HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...view more 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S32 | 3M Advanced Materials Division | 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S35 | 3M Advanced Materials Division | 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38 | 3M Advanced Materials Division | 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...view more 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S38HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush streng...view more 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S42XHS | 3M Advanced Materials Division | 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60 | 3M Advanced Materials Division | 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...view more 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles S60HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...view more 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Glass Bubbles XLD3000 | 3M Advanced Materials Division | 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...view more 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-250 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product pe...view more 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-250 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-250 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-270 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The ...view more 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-270 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-270 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-450 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the...view more 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-450 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-450 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive and Sealer SRA-451 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates th...view more 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-451 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-451 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. view less | |
| 3M™ Stain Resistant Additive SRC-220 | 3M Advanced Materials Division | 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product...view more 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRC-220 offers durability, long-lasting performance and UV resistance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRC-220 is easy to incorporate into existing water and some solvent-based products and can be added to existing formulations or diluted with water or water miscible solvents and used as a stand-alone sealer. view less | |
| 3NG810 | Univar Solutions | 3NG810 is an ester of TMP alcohol and C8C10 acid, and is used as a lubricant in synthetic engine oils. | Request Sample |
| 3NG810 | OXEA | 3NG810 is an ester of TMP alcohol and C8C10 acid, and is used as a lubricant in synthetic engine oils. | |
| 4 HPC | Toyal Europe | 4 HPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 4 HPS | Toyal Europe | 4 HPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| (4) NATCATalyst 140B | NiCHEM CORP. | NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol. | |
| 4 NPC | Toyal Europe | 4 NPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 4 NPS | Toyal Europe | 4 NPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 4 UPC | Toyal Europe | 4 UPC is a silver-grey, atomized aluminium powder composed of irregularly shaped particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 4 UPS | Toyal Europe | 4 UPS is a silver-grey, atomized aluminium powder composed of spherical particles. This product is used as a metallic silver pigment in coating and ink applications. | |
| 4- vinyl-1-cyclohexene | Puyang Shenghuade Chemical Co., Ltd. | 4- vinyl-1-cyclohexene is a liquid base product that is colorless. This product has a flash point of 16 ºC and boiling point at 126-127 ºC. 4- vinyl-1-cyclohexene is used in polymer manufacturing and organic synthesis. | |
| 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) | North Wanxing Chemical Co., Ltd. | 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,...view more 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) has a boiling point of 188-189°C, gas chromatography content of 98% minimum, and a melting point of 16-18°C. view less | |
| 4-Hydroxybutyl Acrylate (4HBA) | Kowa American Corporation | 4-HBA is a clear water white liquid. It is used for automotive painting. It helps protect against hardness and anit-rust, as well as offers good color, flatness, smoothness, brightness, and gloss. | Request Sample |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4-Sulpho-1,8-Naphthalic Anhydride, Potassium Salt | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. | 4-Sulpho-1,8-Naphthalic Anhydride, Potassium Salt is a straw yellow white uniform powder that is an important material to synthesize vat dyes and pigments. | |
| 4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII | PhibroChem | 4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII is a colorless, transparent liquid. Reactive through its vinyl or epoxide functionalities, it is useful as a chemical intermediate. It also serves as reactive diluent where high crosslink density is not critical. Th...view more 4-Vinyl-1-Cyclohexene 1,2-Epoxide TTAII is a colorless, transparent liquid. Reactive through its vinyl or epoxide functionalities, it is useful as a chemical intermediate. It also serves as reactive diluent where high crosslink density is not critical. This product is used in addition polymerization reaction in luminescent materials, electronic chips encapsulant, sealant, coupling agent, organic silicon synthesis, and microelctronics. view less | Request Sample |
| 40-200™ | Univar Solutions | 40-200™ is a dry ground marble with a coarse particle size controlled between 40 and 200 mesh screens. It is widely used in applications with high loading levels such as cement finishes, textured coatings, and abrasives. | Request Sample |
| 4032 Carbon Black | Lansco Colors | 4032 Carbon Black is a medium particle size, granular carbon black pigment with medium viscosity and jetness. This product is used in coating applications. | |
| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
| 410 Carbon Black | Lansco Colors | 410 Carbon Black is a granular carbon black pigment with high viscosity. This product is used in coatings, UV and solvent based inks. | |
| 42DT381 | Flint Group | 42DT381 is a transparent yellow pigment with a color index number of PY 42. It has a specific gravity of 3.5 and can be used primarily in UV/EB solutions. | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-dithiodimorpholine | Hainan Zhongxin Chemical Co., Ltd. | 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in t...view more 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in the production of synthetic rubbers and adhesives. view less | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...view more 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. view less | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4489-M-60 Long Oil Silicone Modified Alkyd Resin | Gabriel Performance Products | 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...view more 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. view less | |
| 461 Carbon Black | Lansco Colors | 461 Carbon Black is a blue tone black pigment powder with medium viscosity and good flood resistance that is used in coatings. | |
| 4640NS | Toyal Europe | 4640NS is a silver-grey, non-leafing-type aluminium pigment paste, comprised of aluminium flakes and oleic acid in a medium aliphatic and light aromatic solvent. This product is suitable for use, especially in conjunction with other pigments, in metallic ...view more 4640NS is a silver-grey, non-leafing-type aluminium pigment paste, comprised of aluminium flakes and oleic acid in a medium aliphatic and light aromatic solvent. This product is suitable for use, especially in conjunction with other pigments, in metallic paint and ink applications. view less |
